Assessment: What's Your Efficiency Ranking? Take a few minutes to see

Your Industry:

4 Tips for Winterizing Your Facility

Grace Flack
  • Jan 05, 2017
  • 3 minute read

Are you ready for everything that winter might through your way? Use these four tips to make sure!


Winter building maintenance is best done during the autumn months. By preparing ahead of time, you can save money and prevent future damages to your property. Use these four tips to winterize your facility and gain some peace of mind.


1. Set a temperature

Building managers should know ahead of time what the indoor temperature will be set at throughout the winter months. By sticking to set temperatures, businesses can potentially save hundreds of dollars a year. So before winter hits, decide on a daytime and a nighttime temperature for your facility.


2. Take care of your trees

You might think that the foliage around your facility can take care of itself over the winter, but there are things you can do to make sure your trees come out of the cold season looking good. Trees and shrubbery can often help to prevent water from entering a building's foundation, so it's important to keep them healthy. Oregon State University recommends pruning tree branches to keep younger trees from looking tangled. You should also consider putting mulch around the base of your trees. This will help to insulate them from harsh weather, and they'll retain water more efficiently.


3. Prepare your irrigation system

Does your facility use an automatic system to irrigate the landscape? You'll have to prepare the system for winter before the first freeze of the year. Colorado State University says that sprinkler systems must be drained in northern parts of the U.S. where the ground can freeze severely. With that done, you need to drain the pumps of any remaining water, turn them off for the season and make sure the backflow valves are equipped with a blowout fitting.


4. Clean vents and chimneys

Autumn is the perfect time to replace your air filters and clear out chimneys and ductwork. You'll be heating the facilities up for the first time since spring and that will burn all the dust that's built up over the intervening months. Replacing filters will keep the indoor air quality at healthy levels and clearing the chimneys will reduce the risk of blockage or fires. Also, if your boiler or heater is over 15 years old, consider getting it inspected. Better to find out about any problems in the autumn rather than discovering them in the coldest months of winter.


Wanting to keep your facility in tip-top shape and operating efficiently? Start the conversation with us on how to do that better!

Interested in learning about how our software works for you?

Or want to ask a question?

Contact Us
  • prev
    3 minute read

    What Industry 4.0 Means for Manufacturers

  • next
    2 minute read

    Open Letter to All Operations Professionals